How to use the diesel generator set when operating in high altitude plateau area and extremely cold climate.

When the engine matched with the diesel generator set, especially the naturally aspirated engine is used in the plateau area, it will lose some power because the air is thin and cannot burn as much fuel as it does at sea level. For the naturally aspirated engine, the power will lose about 3% every 300m above sea level. Therefore, when working in the plateau area, lower power should be used to prevent smoke and excessive fuel consumption.

Working in cold weather conditions: Add auxiliary starting equipment (such as fuel heaters, oil heaters, water jacket heaters, etc.) to use fuel heaters or electric heaters to heat the cooling water, fuel, and lubricating oil of the cold engine, causing the entire engine to warm up and start smoothly.

Heat the mixture (or air) entering the cylinder using an intake preheater (electric heating or flame preheating) to increase the compression endpoint temperature and improve ignition conditions. The electric preheating method involves installing a glow plug or wire in the intake pipe to directly heat the intake air. It does not consume oxygen in the air and does not pollute the intake air.

Using high-energy batteries, such as current nickel hydrogen batteries and nickel cadmium batteries. Pay attention to heating or insulation of the battery. If the temperature in the computer room drops below 0 ℃, a battery heater should be equipped. To maintain the capacity and output power of the battery.

The above content is about "outdoor container type generator of Comler Power: how to use diesel generator?". Comler Power, the manufacturer of outdoor container type generator, hopes to help you, and hopes you can pay attention to the official website of Comler Power, the manufacturer of outdoor container type generator http://www.comler.cn In order to provide you with more information.